|
GP305 shown in photo above
 |
 |
5.5 HP Honda with 6-1 reduction gear |
|
Separate Controls for Forward and Reverse |
|
New Mechanical Reverse adds production without hydraulics |
|
New Ergonomic Handle Bar Design and Control Handles |
|
New and Improved Differential drive train |
|
Deadman type brake (disc brake) |
|
Back 400 x 8" swivel for ease of handling |
|
Swivel wheel assembly with tapered roller bearings |
|
Two 18 x 8.50" ribbed drive wheels |
|
Weight 390 lbs. |
|
GP350 as in #1 above
|
|
|
5.5 HP Honda |
|
One Control for Forward & Reverse |
|
Hydraulic Pump & Motor for dependable power |
|
New and Improved Differential |
|
Back 400 x 8" swivel for ease of handling |
|
Swivel wheel assembly with tapered roller bearings |
|
Two 18 x 8.50" ribbed drive wheels |
|
Weight 410 lbs.
|
|
Attachments for GP305 & GP350
Our new Material Platform
shown installed on the GP305 above
#303.1
|
|
Mounts on all our GP Units |
|
Large 5 Feet Wide X 3 Feet Deep |
|
800 lbs. capacity |
|
Weight 77 lbs. |
|
29 Cu. Ft. DUMP HOPPER #2 above
#301.3
 |
|
29 cu. ft. capacity or 600 lbs. |
|
39 " wide hopper |
|
Dump directly into trash chute |
|
Weight 165 lbs. |
|
GRAVELER #3 above
#5.301
 |
|
8 cu. ft. capacity |
|
Spreads 36" wide |
|
Gravel gate linkage slips easily into place |
|
Spreads pea gravel up to 4" ballast rock |
|
Weight 105 lbs. |
|
8 Cu. Ft. DUMP HOPPER #4 above
#301.1
 |
|
8 cu. ft. capacity |
|
39 " wide hopper |
|
Dump directly into trash chute |
|
Weight 95 lbs. |
|
Kit is available to convert to 29 cu. ft. |
|
55 Gallon Hi-Lo DRUM #5 above
#308
 |
|
Splash resistant drums w/ splash guard |
|
2 1/2" cast iron draincock |
|
Insulated drum available |
|
Weight 55 gal. 100 lbs./ insulated 150 lbs. |
|
Optional 2 1/2"
stem thermometer |
|
Chariot Assembly #6 above
for GP305 or 350
 |
|
Standard - two 400 x 8 Flat Free Tires |
|
Optional - two 18 x 8.50 x 8 rear tires |
|
Order the Chariot Installed or as a Kit |
|
Retrofits to your existing units |
|
Weight 85 lbs. |
|
Shown installed on a GP300 |
|
Not Shown is the Chariot with a driver's post. New photos are coming. |
|
Just need a Graveler?
Hot Process POWER GRAVELER
#193
 |
|
5.5 HP Honda with 6-1 reduction gear |
|
8 cu. ft. capacity |
|
Deadman type brakes |
|
36" wide hopper |
|
Spreads pea gravel up to 4" ballast rock |
|
Two 18 x 8.50" ribbed drive wheels |
|
Rear 400 x 8" swivel wheel with tapered roller
bearings |
|
Weight 420 lbs. |
|
Or a Single Ply Graveler?
Cold Process POWER GRAVELER
#194
 |
|
5.5 HP Honda with 6-1 reduction gear |
|
8 cu. ft. capacity |
|
Deadman type brakes |
|
36" wide hopper |
|
Spreads pea gravel up to 4" ballast rock |
|
Two 18 x 8.50" ribbed drive wheels |
|
Front 400 x 8" swivel wheel with tapered roller
bearings |
|
Weight 420 lbs. |
|
|
