|
|
Kettles & Accessories
Single Burner Kettles |
Double Burner Kettles |
Other Kettles
Afterburner/Safety Loader System |
Kettle Accessories |
Roofing Equipment Intro
Powered On-Deck
"Twister" Powered Ripper, Roof Cutters |
GP300, GP350 & 194 Gravelers
"Little Tex", "Big Tex", & "Super Tex" Spudding Machines & 196 Power Broom
Non-Powered On-Deck
Graveling Equipment |
Moppers, Mop Carts, & Buckets
Luggers & Hot Tanks |
Carts & Material Handling |
Hand Tools
Other Deck & Safety Equipment
Guard Rails, Warning Lines & Texas Hold'um |
Hot Pipe & Accessories
Hoisting Equipment & Accessories |
Trash Chutes & Hoppers
|
|
|
GET EVERYTHING YOU NEED
FOR HOT PIPE SET-UP
 |
|
Reeves Hot Pipe or Roof Tubing
Reeves Hot Pipe is 1-3/4" Tubing with 1-1/2" HD Nipples welded
on each end. Manufactured in 5', 10', 15', and 20' lengths. |
|
Reeves 120 Degree Elbow
(other options below) |
|
Reeves Flex Hose With Protective Sleave
|
|
Reeves Hot Pipe Stand |
|
Reeves Guard Rail System
(See "Guard Rails and Warning Line" for more about Safety Equipment) |
|
REEVES HOT PIPE STAND
#441
 |
|
Quick Set-up |
|
Height Adjustable for Easy Positioning |
|
Top Tubing Clamp |
|
Weight 30 lbs. |
|
120 DEGREE ELBOW
#150
 |
|
Our 1-3/4" Tubing Formed into a 120 Degree Elbow |
|
Unit has a HD Nipple Welded on The Bottom
to Attach to a Union, and a Coupling on the Top End to Connect a Flex Hose (as shown) |
|
Weight 7 lbs. |
|
SWING JOINT ONLY
#162
 |
|
Unit consists of 1-1/2" street ell and 1-1/2" elbow |
|
Screws on top of a Hot Pipe
to allow easy hook-up of Flex Hose (as shown) |
|
Makes a safer Connection for Hot Pipe to Flex Hose |
|
Allows the Flex Hose to hang straight down |
|
Weight 2 lbs. |
|
24" DOWNSPOUT w/SWING JOINT
#163
 |
|
The same unit as #162 with
the addition of a 24" tubing Downspout |
|
Used in place of a Flex Hose to fill Containers |
|
Swing Joint allows movement of the Downspout |
|
Weight 2 lbs. |
|
REEVES HEAVY DUTY FLEX HOSE
#157 COMES STANDARD WITH A PROTECTIVE SLEEVE
 |
|
Start with a Heavy Duty Flex Hose (as shown on the left side of the photo) |
|
ADD a Heat Resistant Protective Sleeve for Safety |
|
Flex Hose is rated for Tar & Asphalt |
|
1-1/2" Nipple to
connect to a Swing Joint or 120 Degree Elbow |
|
Weight 10 lbs. |
|
REEVES HOT PIPE UNIONS
#698 STANDARD & #699 HAMMER-ON
 |
|
#698 is a Standard Black Union |
|
#698 can be used for most applications but
requires a wrench to tighten |
|
#699 is a Heavy Duty 2000# Union.
It has large coupling threads for easy hook-up and large ears for tightning with a hammer. |
|
#699 can be used in all applications but is
of most value when speed of set-up is a factor or when additional strength
is needed for multiple story heights. |
|
Both Unions are 1-1/2" for use with Reeves Hot Pipe. |
|
ABOUT REEVES HOT PIPE
|
|
Reeves Hot Pipe is 1-3/4" Tubing with an 1-1/2" Heavy Duty Nipple welded on each end |
|
Each section has a cable loop welded on one end (large cable loops optional) |
|
Sections are available in 5', 10', 15', & 20' lengths |
|
Reeves offers two tubing packages, Get everything you need!
Each package comes with 40' of tubing in various lengths, a 5' Flex Hose, a 120 Degree Elbow and 5 Unions.
The Economy Tubing Package comes with Standard Unions and the Special Tubing Package comes with 2000# Hammer-on Unions |
|
|
|
|
