Reeves Equipment

"TWISTER" POWERED ROOF RIPPER

#210a

	11 hp. Honda with oil alert
	Optional 11 hp. Honda with electric starter
	Rugged heavy duty hydraulic drive system for reliable and precise control
	A True 'Hydraulic' drive. Don't pay more for unnecessary horsepower! This hydraulic system will out perform and out last machines with bigger engines and lawnmower type hydrostatic drives.
	3.7 Gal. hydraulic reservoir (14 liters) for cooler operating temperatures and extended equipment life
	Easy to operate forward and reverse and blade actuator controls
	New easy-to-operate "Twist Grip" for forward and reverse drive
	Reciprocating (front to back motion) 21" wide hardened tear-off blade with single handle control
	Dead-man engine cut off safety switch
	Easy to operate parking disk brake
	Easy blade change (only 4 bolts)
	Two position blade-unbolt blade and flip over for a different angle
	Drive wheels -16 x 5" solid rubber flat surface Chevron Tread tires for positive traction
	Length-90", width 33", height-44"
	Weight 600 lbs.

	Available extra traction: Shown with optional dual-wheel kit - helps keep your grip on tough jobs!
	Optional: Toothed Blade available

"MIGHTY MINI" Single Blade ROOF SAW

#158

	5.5 HP Honda Engine
	Uses a standard 12" carbide tip blade
	Adjustable cutting depth to 3 1/2" with adjustable blade cover
	Heavy duty body w/1" shaft & bearings.
	One front and two rear 8 x 2.50" semi pneu. tires
	*Height Clearance 17 Inches*
	*Adjustable handle lets you reach under a/c units and other machinery!*
	Weight 145 lbs.

Single Blade ROOF CUTTER

#168

	Standard with a 9 HP Honda Engine
	Standard with a Hi Rise Air Intake for Cleaner Engine Cooling
	Ships with standard 12" carbide tip blade, 14" blade available
	Heavy duty body w/1" shaft & bearings.
	Two rear 12 x 3" semi pneu. tires
	Front 10 x 2.75" semi-pneu. tires
	Adjustable cutting depth to 3 1/2" (using 12" blade) with Floating Blade Cover
	Weight 230 lbs.

Heavy Duty Single Blade ROOF CUTTER

#170

	Standard with 11 HP Honda Engine
	Available with 11 HP Honda with Electric Start
	Standard with a Hi Rise Air Intake for Cleaner Engine Cooling
	Ships with standard 12" carbide tip blade, 14" blade available
	Heavy duty body w/1 1/4" shaft & bearings.
	Two rear 12 x 3" semi pneu. tires
	Front 10 x 2.75" semi-pneu. tires
	Adjustable cutting depth to 3 1/2" (using 12" blade) with Floating Blade Cover
	Weight 250 lbs.

Double Blade ROOF CUTTER

#171

	Standard with 13 HP Honda Engine
	Available with 13 HP Honda with Electric Start
	Available with 20 HP Kohler with Electric Start
	Ships with 2 standard 12" carbide tip blades, 14" blades available
	Standard with a Hi Rise Air Intake for Cleaner Engine Cooling
	Adjustable cutting depth to 3 1/2" (using 12" blade) with Floating Blade Covers
	Two rear 12 x 3" semi pneu. tires
	Two front 10 x 2.75" semi-pneu. tires
	Handy throttle control
	Weight 285 lbs.
	Cuts are 24" inches apart

"BLADERUNNER II" Self-propelled Hydraulic

Double Blade ROOF CUTTER with Headlight

#173

	20 HP Kohler with Electric Start
	Fully hydraulic drive allows for precise cutting through the toughest material
	NEW DESIGN WITH... Easy access belt cover, Quick change belt system, Sliding rail belt tensioning for the blade shaft, Extra long operator handles for easy maneuvering, and Dash board control panel making cutting height adjustment, key switch, choke, and throttle easy to reach
	Standard with a Hi Rise Air Intake for Cleaner Engine Cooling
	Ships with 2 standard 12" carbide tip blades, 14" blades available
	Adjustable cutting depth to 3 1/2" (using 12" blade) with Floating Blade Covers
	Two rear 4.10" X 3.5" X 6" foam filled tires
	Two front 10 x 2.75" semi-pneu. tires
	Control forward and reverse drive motion with one simple handle
	Handy throttle control
	Weight 430 lbs.
	Cuts are 24" inches apart